Skip to content
Design System
GitHub

Robotics UI kit

The SYNCROBOTIC Design System is a UI kit for the people who run robots: React components for robot control apps, fleet consoles and teleoperation, built on shadcn/ui and Tailwind CSS v4. Each one installs into your project as source.

Most UI kits stop at buttons, forms and charts. A robot app also needs an emergency stop that is never hidden, a drive control that fails safe, a map in metres, a camera that says when it froze, and alarms an operator can trust at 3 a.m. Those are here, with the same tokens, dark and light themes, a high-contrast mode for sunlight and glove-sized targets for the field.

Safety

Stopping comes first: the stop is always on screen, and a dangerous action needs a deliberate gesture.

Driving and missions

Manual driving that stops the robot the moment the finger lifts, and a map to send it somewhere.

What the robot sees

The camera, the LiDAR and the map it built, each saying in words whether the picture is live.

The robot's state

Pose, joints, battery and status, in shapes and words rather than colour alone.

App shell for robot apps

The frame of a control app held outdoors: a dynamic island for the one thing that matters now, a dock and trays.

Works with ROS and ROS 2

No ROS library inside: the components take plain props in the shape the messages arrive in (REP 103 axes, metres and radians), so whatever bridge your app uses passes them straight through.

MessageComponentProps
nav_msgs/OccupancyGridrobot-mapgrid, costmap
sensor_msgs/LaserScanrobot-mapscans
geometry_msgs/PoseStamped (goal)robot-mapmode="goal", onGoal
sensor_msgs/PointCloud2 (decoded)point-cloudpoints, intensity
sensor_msgs/JointStatejoint-state, robot-modeljoints
URDF (robot_description)robot-modelurdf, urdfUrl
geometry_msgs/Twistteleop-padonCommand: { linear, angular }
Video (WebRTC or a URL)camera-feedstream, src

To get them there from a robot, use-ros connects over rosbridge with no ROS library and converts each message on the way: see Connect to ROS, with a live example and the safety notes for driving over a browser.

Install

Add the registry once (see Installation), then any component by name. robot-model is the only one that brings three.js; the rest add no 3D or map library.

bash
npx shadcn add @syncrobotic/stop-button @syncrobotic/teleop-pad @syncrobotic/robot-map @syncrobotic/camera-feed